FAT-TD系列单极双作用气体增压泵

详细介绍

气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体，输出气压可通过驱动气压无级调节。

The pneumatic booster pump is driven by the low-pressure gas at the large area piston end to produce the high-pressure fluid at the small area piston end. It can be used for compressed air and other gases. The output air pressure can be steplessly adjusted by driving air pressure.

不同之处在于该系列泵是在FAT-A系列气体增压泵系列基础上制造的双头泵，整台增压装置全部采用铝合金及不锈钢制造。它的驱动活塞直径为160mm，驱动气压≤8bar,两端泵头均带有排气冷却。出厂时两入口及两出口可按用户要求连接好管路。气体输入端有流量和气体压力的情况下，并且有要求出口压力和流量同时的情况下可以选择该款双级单作用气体增压泵。The difference is that this series of pumps is a double head pump manufactured on the basis of fat-a series of gas booster pumps. The whole booster device is made of aluminum alloy and stainless steel. The diameter of its driving piston is 160mm, the driving air pressure is ≤ 8bar, and the pump heads at both ends are equipped with exhaust cooling.

The two-stage single acting gas booster pump can be selected when there is a certain flow and gas pressure at the gas input end and the outlet pressure and flow are required to be the same.

多种气体驱动：压缩空气、氮气等。  

驱动输入：0.3-0.69MPa压缩空气驱动就可获得高压输出。    

自动保压：工作时，迅速往复工作，随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止，并保持这个压力，此时消耗能量很小，无热 量产生，无零件运动。当压力平衡打破后，气动增压泵自动开始工作到下一个平衡。　　材质优良：高压部分材质为不锈钢304或316。    

高压柱塞材质为不锈钢304或316，并采用双层密封。　　

Various gas drives: compressed air, nitrogen, etc.   

Drive input: 0.3-0.69mpa compressed air drive can obtain high-pressure output.     

Automatic pressure maintaining: when working, it works back and forth rapidly. As the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops, and maintains this pressure. At this time, the energy consumption is very small, no heat is generated, and no parts move. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance. Excellent material: the high pressure part is made of stainless steel 304 or 316.     

The high-pressure plunger is made of stainless steel 304 or 316 and adopts double-layer seal.

维护简单：气动增压泵的零件及密封少，维护简单且成本低。相同系列泵的所有"O"型圈，维修包易损部件可相互替换，大大降低了维修成本。

　　1、保压期间无消耗能量

      2、 具有防爆功能，无需电力或电线连接

      3、 结构小巧，重量轻，不受天气变化影响

      4、 易实现自动控制

      5、 抗污染

      6、输出静态压力由驱动气压来五级调节

      7、 在满负载时非常容易进行启动、停止操作

      8、 易安装，操作。

Simple maintenance: the pneumatic booster pump has few parts and seals, simple maintenance and low cost. All "O" rings and vulnerable parts of the maintenance kit of the same series of pumps can be replaced with each other, greatly reducing the maintenance cost.

1. No energy consumption during pressure maintaining
2. With explosion-proof function, no power or wire connection is required
3. Compact structure, light weight, not affected by weather changes
4. Easy to realize automatic control
5. Anti pollution
6. The output static pressure is regulated in five stages by the driving air pressure
7. It is very easy to start and stop at full load
8. Easy to install and operate.

气动增压泵技术参数：

Technical parameters of pneumatic booster pump:

小提示：压缩比=大活塞面积/小活塞面积=输出压力/驱动压力      

Tip: compression ratio = large piston area / small piston area = output pressure / drive pressure

缩小：      PL=驱动压力            PA=泵入口压力               PB=输出压力

Reduction:  PL = driving pressure    PA = pump inlet pressure      Pb = output pressure